How much clearance do I need for ball bearing drawer slides?

Ball bearing slides typically require 12.7mm (1/2 inch) clearance on each side. So the drawer box width should be 25.4mm narrower than the cabinet opening. Always check the manufacturer specifications as some slides may differ slightly.

What is the difference between ball bearing and euro slides?

Ball bearing slides use steel ball bearings for smooth, full-extension movement and can support heavier loads (typically 35-45 kg). Euro or roller slides use nylon rollers, are cheaper, and usually offer 3/4 extension only. Ball bearing slides are preferred for kitchen drawers and heavy-duty use.

How do I choose the right slide length?

The slide length should be close to the depth of your cabinet, typically 25mm shorter. Slides come in standard lengths at 50mm increments (250mm to 600mm). Choose the longest slide that fits your cabinet depth to maximise drawer extension.

Do undermount slides need side clearance?

Undermount slides (like Blum Tandem) mount underneath the drawer and do not require side clearance. The drawer box width should be 42mm less than the cabinet opening for Blum Tandem slides. Always refer to the manufacturer fitting guide for exact dimensions.

WoodCalcs

Drawer Slide Calculator — Drawer & Slide Dimensions

Work out drawer box dimensions and slide length based on your cabinet opening and slide type.

Slide Type

Cabinet Opening Width

Internal width of cabinet opening

Cabinet Depth

Internal depth of cabinet

Material Thickness

Drawer box side thickness

Drawer Front Overlap

Overlap on each side of opening

How We Calculate This

This calculator determines the correct drawer box dimensions based on your cabinet opening and chosen slide type.

The formula

Drawer box width = Cabinet opening - (2 x slide clearance)

Drawer depth = Cabinet depth - 25mm (for rear clearance)

Slide length = nearest 50mm increment below (cabinet depth - 25mm)

Standard clearances: Ball bearing 12.7mm per side, Euro 12.5mm per side, Undermount 0mm (mounts below), Wooden runners 1.5mm per side.

Frequently Asked Questions

Related Calculators

Shelf Span Calculator

Calculate maximum shelf span before sagging based on material and load.

Table Leg Calculator

Calculate table leg dimensions and taper angles for stable tables.

Chair Seat Height Calculator

Determine ergonomic chair dimensions based on user height.

Bookcase Calculator

Calculate shelf spacing, material quantities, and dimensions for bookcases.

Cabinet Door Calculator

Work out cabinet door dimensions and overlay calculations.

Last updated: February 2026

All calculations are estimates. Always verify measurements and material quantities before cutting or purchasing.