Which way should the diagonal brace go on a gate?

The diagonal brace should run from the bottom hinge corner to the top latch corner, forming an upward slope from hinge to latch side. This transfers the weight of the gate back to the hinge post. If installed the wrong way, the gate will sag.

How wide should a pedestrian gate be?

A standard pedestrian gate is 900mm (3ft) wide, which allows comfortable single-person passage. For wheelchair access, allow 1000mm minimum. Driveway gates should be at least 2.4m (8ft) wide for a single car, or 3.6m for comfortable two-way access.

How do I stop a wooden gate from sagging?

Ensure the diagonal brace runs the correct way (bottom hinge to top latch). Use a substantial hinge post set at least 600mm deep in concrete. Three hinges distribute weight better than two for heavy gates. Add a gate wheel for extra support on large gates.

What size posts do I need for a gate?

For a pedestrian gate, use 100 x 100mm posts minimum. For double driveway gates, use 125 x 125mm or 150 x 150mm posts. Posts should be set 600mm deep in concrete. The hinge post takes most of the load and should be the most solidly fixed.

WoodCalcs

Gate Calculator — Timber & Hardware for Gates

Calculate timber and hardware quantities for garden and driveway gate construction.

Gate Type

Select the gate type for your calculation

Style

Choose the style that suits your project

Gate Width (total opening)

Shortest dimension of the area

Gate Height

Measure floor to ceiling or top of area

Board Width

Width of each board

Timber Price per Metre (optional)

Enter your supplier price per metre

How We Calculate This

This calculator estimates timber and hardware for a traditional ledged and braced gate.

Board calculation

Vertical boards = ceil(Gate width / (Board width + Gap))

Close board style has no gaps. Palisade style includes 25mm gaps between boards.

Diagonal brace

Brace length = sqrt(Width² + Height²) (Pythagoras theorem)

Posts include 600mm extra length for burial in the ground with concrete.

Frequently Asked Questions

Related Calculators

Decking Board Calculator

Calculate the number of decking boards, screws, and joist hangers needed.

Deck Joist Calculator

Work out joist sizes, spacing, and quantities for a deck subframe.

Pergola Calculator

Calculate timber quantities for pergola posts, beams, and rafters.

Fence Panel Calculator

Work out fence panel, post, and gravel board quantities for a boundary.

Garden Bench Calculator

Calculate timber quantities and dimensions for a garden bench build.

Last updated: February 2026

All calculations are estimates. Always verify measurements and material quantities before cutting or purchasing.