What is a compound angle?

A compound angle combines both a mitre (rotation in the horizontal plane) and a bevel (tilt of the blade). It is needed when pieces meet at a corner that is not perpendicular, such as the sides of a planter box with sloped walls or a hopper.

When do I need compound angles?

Compound angles are needed when building anything with sloped sides that also have mitre joints at the corners. Common examples: tapered planters, crown moulding, pyramid forms, sloped-sided boxes, and picture frames with bevelled edges.

How do I set compound angles on my mitre saw?

Set the mitre angle by rotating the turntable (the cross-cut angle from this calculator). Set the bevel angle by tilting the blade. Many mitre saws have limited bevel capacity, so check your saw can achieve the required tilt before starting.

What compound angles do I need for a 4-sided planter with 10 degree slope?

For a 4-sided box (square) with walls sloping inward at 10 degrees from vertical: the mitre angle is about 44.4 degrees and the bevel angle is about 9.9 degrees. Use this calculator to get exact values for your specific combination.

WoodCalcs

Compound Angle Calculator — Mitre & Bevel Settings

Calculate compound mitre and bevel angles for angled joinery and sloped assemblies.

Number of Sides

4 = square, 6 = hexagon, 8 = octagon

Slope Angle from Vertical

0° = vertical, 90° = horizontal

How We Calculate This

This calculator determines the mitre and bevel settings for a compound angle joint on a regular polygon with sloped sides.

Formulas

Mitre angle = arctan(sin(slope) x tan(180/n))

Bevel angle = arctan(cos(180/n) / tan(slope))

Where n = number of sides and slope = angle of the side from vertical. The calculator also provides the saw settings: cross-cut angle (90 minus mitre) and blade tilt (90 minus bevel).

Frequently Asked Questions

Related Calculators

Angle Calculator

Calculate angles for mitres, bevels, and polygon joints in woodworking.

Diagonal Calculator

Work out diagonal measurements for squaring up frames and cabinets.

Taper Calculator

Calculate taper angles and jig settings for tapered legs and wedges.

Radius Calculator

Find radius from chord and height measurements for curved work.

Arc Calculator

Calculate arc lengths, rise, and radius for curved woodworking pieces.

Last updated: February 2026

All calculations are estimates. Always verify measurements and material quantities before cutting or purchasing.