Sheet Goods Calculator — Plywood, MDF & Chipboard
Calculate how many sheets of plywood, MDF, or chipboard you need for your project area.
Total length of area to cover
Total width of area to cover
Recommended for cutting losses and offcuts
Leave blank to skip cost estimate
How We Calculate This
This calculator works out how many sheet goods you need based on your project area.
The calculation
Sheets needed = Project area ÷ Sheet area
The result is rounded up to whole sheets, since you cannot buy partial sheets.
Waste allowance
When enabled, the calculator adds 10% to the area before dividing by sheet area. This accounts for saw kerf (typically 3mm per cut), offcuts that cannot be reused, and trimming damaged edges.
Standard UK sheet sizes
- 2440 × 1220mm (8′ × 4′) = 2.977 m²
- 3050 × 1525mm (10′ × 5′) = 4.651 m²
- 2440 × 610mm (half sheet) = 1.488 m²
Frequently Asked Questions
Related Calculators
Board Feet Calculator
Calculate board footage from timber dimensions for lumber purchasing.
Timber Volume Calculator
Work out the volume of timber in cubic metres or cubic feet.
Plank Calculator
Work out the number of planks needed to cover a given area.
Wood Weight Calculator
Estimate the weight of timber based on species and dimensions.
Timber Cost Calculator
Calculate the total cost of timber based on quantity and price per unit.
Last updated: February 2026
All calculations are estimates. Always verify measurements and material quantities before cutting or purchasing.